化工机械设备网

登录

行业化工设备橡胶设备切胶机

GL 1注油器

供应商:
上海福磬机械有限公司
企业类型:
代理商

产品简介

For Single–Line Parallel Automatic Lubrication Systems.
Important Safety Instructions
Read all warnings and instructions in this manual and manual 309015. See manual 309015 for Automatic Lubrication S

详细信息

For Single–Line Parallel Automatic Lubrication Systems.
Important Safety Instructions
Read all warnings and instructions in this manual and manual 309015. See manual 309015 for Automatic Lubrication System installation, operation, and troubleshooting. Save all instructions.

SKIN INJECTION HAZARD
Fluid from the injector, leaks, or ruptured components can inject fluid into your body and cause extremely seri-ous injury, including the need for amputation.
Fluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate surgical treatment.

Fluid splashed in the eyes or on the skin can also cause serious injury. The equipment may be pressur-ized already, or it could become pressurized by an automatic lube cycle initiated by Lubrication Controller (timer). Disconnect power to the timer, and disconnect the air supply to the pump module to ensure that the system is depressurized. See the pressure relief pro-
cedure in Pump Module manual 308955.

GL-1 Injector Models

 

 

Part No.

Description

Dimension A

Dimension B

Bare Manifold Part No.

 

 

114901

Injector, GL–1, one point

 

2.48 in. (63.0 mm)

114911

 

 

114902

Injector, GL–1, two point

 

3.00 in. (76.0 mm)

114912

 

 

114903

Injector, GL–1, three point

1.25 in. (31.7 mm)

4.23 in. (107.5 mm)

114913

 

 

114904

Injector, GL–1, four point

2.50 in. (63.4 mm)

5.47 in. (139.0 mm)

114914

 

 

114905

Injector, GL–1, five point

3.75 in. (95.1 mm)

6.71 in. (170.5 mm)

114915

 

 

114909

Injector, GL–1, replacement

 

 

 

 

Graco Standard Warranty

 

Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations.

 

This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.

 

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.

 

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT

 

LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

 

Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.

 

GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

 

PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.

 

In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise.

 

FOR GRACO CANADA CUSTOMERS

 

The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite de ou en rapport, directement ou indirectement, avec les procédures concernées.

 

 

Graco Information

 

For the latest information about Graco products, visit www.graco。。com.

 

TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor. Phone: 612-623-6928 or Toll Free: 1-,  612-378-3590