化工机械设备网

安捷伦/赛默飞液质联用氮气发生器操作流程

开机后能正常工作，但工作过程中压力下降达不到设定压力，压缩机不启动 此类故障般由热保护引起，容易引起热保护的有：

1、进气口堵塞(清洗空气过滤器)、

2、压缩机缺油(加入18号冷冻机油200克)。

3、单向阀漏气导致启动压力过高(更换单向阀)

安捷伦/赛默飞液质联用氮气发生器产品简介

Anyan品牌氮气发生器是种*的气体分离技术，以韩进口膜分离空气制取高纯度的氮气，空气经压缩机压缩过滤后进入高分子膜过滤器，由于各种气体在膜中溶解度和扩散系数不同，导致不同气体在膜中相对渗透速率不同，在定压力条件下，利用氧和氮等不同性质的气体在膜中具有不同的渗透速率来使氧和氮分离。和其它制氮设备相比它具有结构更为简单、体积更小、无切换阀门、维护量更少、产气更快(≤3分钟)、增容方便等优点。更多详细资料请与乔跃小马

产品特点

高纯度氮气发生，氮气发生器选购指南

1. 韩进口膜分离，纯度高，使用寿命长，无耗材更换。

2. 内置业除水分离器，确保吸附剂的使用寿命长。

3.采用多超精密高通量压缩空气净化系统，且带过滤单元失效预警提示

3. 氮气纯度显示，可清晰观察机器产氮气的纯度，精度高。

4. 内置压缩机，无需外配，24小时不间断工作，且采用悬空隔音系统，噪音小。

5. 双重压力值可调系统，操作简单方便

6. 采用体式设计，整机集成空压机、净化除水系统、氮气，干燥空分离制备系统，

8.程序控制智能化的自诊断功能和服务提示功能，便于维护

9.高度集成的模块化结构设计，节省实验室空间

10.系统内置贮气罐稳压单元，带际标准的安全阀设计

11.带脚轮可移动式设计，方便移动。

产品选型

1.产品型号：AYAN-30L1

1、氮气流量≥30L/min,

2、氮气纯度：99%～99.99%

3、输出压力：105psi，可任意调节

4、无液滴残留、无邻苯二甲酸酯类化合物残留、颗粒物小于0.01um、压力露点<-40℃

5、噪音;<56分贝

6、大功率：1700W

7、规格尺寸：700mmX500mmX1000mm

8、重量;150kg

产品相册

公司介绍

Welcome new and old customers to consult, need or have no understanding of our products at any time to consult us, we are happy to serve you.

After-sales service guarantee

As a kind of professional test equipment, the test equipment has relatively high requirements on the test environment and configuration, which have certain requirements and in their corresponding standards. Moreover, the test results of the same test in different test environments and configuration conditions will also have great differences. Therefore, As an experimental equipment manufacturer, Shanghai Qiaoyue Electronics Co., Ltd. hereby makes the following guarantees for the instruments sold:

1. Send professional technicians with rich experience in the field of experiment to guide users in the use, maintenance and test configuration of their equipment.

2. Within one month after the acceptance of the equipment by the Demander, if the equipment fails and the supplier fails to repair or repair the equipment for two times, the Supplier shall unconditionally guarantee the replacement within 5 working days.

3. From the date of official acceptance, the supplier shall provide free (including the cost of equipment and materials) warranty service. The period of free quality warranty service is 1 year and lifetime maintenance. Within the warranty period, in case of product failure caused by the supplier's product quality problem, the supplier shall respond within half an hour, provide services, guide the customer to use, and be responsible for free maintenance.