电工万用表组合工具包 F117/323 FLUKE117/323 KIT-化工机械设备网

电工万用表组合工具包 F117/323 FLUKE117/323 KIT

供应商：: 青岛科创贸易有限公司

企业类型：: 其他

产品简介

详细信息

Fluke117 Digital Multimeter. Designed by Electricians. Engineered by Fluke

VoltAlert™ technology for non-contact voltage detection.
AutoVolt automatic ac/dc voltage selection.
Low input impedance: Helps prevent false readings due to ghost voltage.
Large white LED backlight to work in poorly lit areas.
True-rms for accurate measurements on non-linear loads.
Measures 10 A (20 A overload for 30-seconds).
Resistance, continuity, frequency and capacitance.
Min/Max/Average to record signal fluctuations.
Compact ergonomic design for one-handed operation.
CAT III 600 V safety rated.

Fluke 323 True-rms Clamp Meter. Rugged. Reliable. Precise.

400 A ac current measurement.
600 V ac and dc voltage measurement.
True-rms ac voltage and current for accurate measurements on non-linear signals.
Resistance measurement up to 40 kΩ with continuity detection.
Slim, ergonomic design.

CAT IV 300V/CAT III 600 V safety rating.

Fluke 117 Digital Multimeter

Specifications
Maximum voltage between any terminal and earth ground	600 V
Surge protection	6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2
Fuse for A input	11 A, 1000 V FAST Fuse (Fluke PN 803293)
Display	Digital:	6,000 counts, updates 4 per second
Bar graph	33 segments, updates 32 per second
Operating Temperature	-10 °C to + 50 °C
Storage Temperature	-40 °C to + 60 °C
Battery type	9 volt Alkaline, NEDA 1604A/ IEC 6LR61
Battery Life	400 hours typical, without backlight

Accuracy Specifications
DC millivolts	Range	600.0 mV
	Resolution	0.1 mV
	Accuracy	± ([% of reading] + [counts]): 0.5% + 2
DC volts	Range/Resolution	6.000 V / 0.001 V
	Range/Resolution	60.00 V / 0.01 V
	Range/Resolution	600.00 V / 0.1 V
	Accuracy	± ([% of reading] + [counts]): 0.5% + 2
Auto volts	Range	600.0 V
	Resolution	0.1 V
	Accuracy	2.0 % + 3 (dc, 45 Hz to 500 Hz) 4.0 % + 3 (500 Hz to 1 kHz)
AC millivolts1 true-rms	Range	600.0 mV
	Resolution	0.1 mV
	Accuracy	1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
AC volts1 true-rms	Range/Resolution	6.000 V / 0.001 V
	Range/Resolution	60.00 V / 0.01 V
	Range/Resolution	600.0 V / 0.1 V
	Accuracy	1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)
Continuity	Range	600 Ω
	Resolution	1 Ω
	Accuracy	Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer.
Ohms	Range/Resolution	600.0 Ω / 0.1 Ω
	Range/Resolution	6.000 kΩ / 0.001 kΩ
	Range/Resolution	60.00 kΩ / 0.01 kΩ
	Range/Resolution	600.0 kΩ / 0.1 kΩ
	Range/Resolution	6.000 MΩ / 0.001 MΩ
	Accuracy	0.9 % + 1
	Range/Resolution	40.00 MΩ / 0.01 MΩ
	Accuracy	5 % + 2
Diode Test	Range/Resolution	2.000 V / 0.001 V
Diode Test	Accuracy	0.9% + 2
Capacitance	Range/Resolution	1000 nF / 1 nF
	Range/Resolution	10.00 μF / 0.01 μF
	Range/Resolution	100.0 μF / 0.1 μF
	Range/Resolution	9999 μF / 1 μF
	Range/Resolution	100 μF to 1000 μF
	Accuracy	1.9% + 2
	Range/Resolution	> 1000 μF
	Accuracy	5% + 20%
LoZ capacitance	Range	1 nF to 500 μF
LoZ capacitance	Accuracy	10% + 2 typical
AC amps true-rms (45 Hz to 500 Hz)	Range/Resolution	6.000 A / 0.001 A
	Range/Resolution	10.00 A / 0.01 A
	Accuracy	1.5% + 3 20 A continuous overload for 30 seconds max
DC amps	Range/Resolution	6.000 A / 0.001 A
	Range/Resolution	10.00 A / 0.01 A
	Accuracy	1.0% + 3 20 A continuous overload for 30 seconds max
Hz (V or A input)2	Range/Resolution	99.99 Hz / 0.01 Hz
	Range/Resolution	999.99 Hz / 0.1 Hz
	Range/Resolution	9.999 Hz / 0.001 Hz
	Range/Resolution	50.00 Hz / 0.01 Hz
	Accuracy	0.1% + 2

Notes:
1) All ac voltage ranges except Auto-V/LoZ are specified from 1 % to 100 % of range. Auto-V/LoZ is specified from 0.0 V.
2) Temperature uncertainty (accuracy) does not include the error of the thermocouple probe.
3) Frequency is ac coupled, 5 Hz to 50 kHz for ac voltage. Frequency is dc coupled, 45 Hz to 5 kHz for ac current.
4) Temperature Range/Resolution: -40 °F to 752 °F / 0.2 °F

Mechanical & General Specifications
Size	167 x 84 x 46 mm (6.57" x 3.31" x 1.82")
Weight	550 g
Warranty	3 years

Fluke 323 True-rms Clamp Meter

Specifications
AC current	Range 400.0 A
AC current	Accuracy	2 % ± 5 digits (45 Hz to 65 Hz) 2.5 % ± 5 digits (65 Hz to 400 Hz)
AC voltage	Range	600.0 V
AC voltage	Accuracy	1.5 % ± 5 digits