JSN1901 发动机冷却液模拟使用腐蚀测定器(JSN1901)
产品简介
详细信息
产品型号：JSN1901
产品名称：发动机冷却液模拟使用腐蚀测定器(JSN1901)
产品说明：
JSN1901发动机冷却液模拟使用腐蚀测定器
一、符合SH/T0088、ASTMD2570标准
二、主要技术参数：
液体流速： 1.3～1.6L/s
控制温度： 88℃±3℃
运行时间： 1064h
加热功率： 2.6kw
电机功率: 2.2KW
压力指示: 80～103Kpa
整机功率： 4.8kw
工作电源： AC380V±10% 50HZ
外形尺寸： 1370×670×1380=长×宽×高（mm）
整机重量： 180Kg
三、性能及特点
1、仪器采用防爆电机并装有超温保护,储存器盖上面装有安全阀,能确保仪器运行的安全。
2、仪器采用活塞排量为1.6～5.0L的汽车水泵和散热水箱，台面用不锈钢制作,紧固件采用不锈钢螺丝,易拆卸不易生锈。
3、仪器采用进口数显温度控制器，PID跟踪控温精度高。
4、仪器采用涡轮流量计传感器（本产品依据GB/T9246-1999机械行业标准），计量准确直观。
5、仪器采用智能数显计时器, 计时准确,中途停机后能显示实际运行时间。
JSN1901 engine coolant is simulated using a corrosion detector
One, accord with SH/T0088, ASTMD2570 standard
Ii. Main Technical parameters:
Liquid flow rate: 1.3 ~ 1.6l /s
Control temperature: 88℃±3℃
Running time: 1064h
Heating power: 2.6KW
Motor power: 2.2KW
Pressure indication: 80 ~ 103Kpa
Machine power: 4.8KW
Power supply: AC380V±10% 50HZ
Dimensions: 1370×670×1380= Length × width × height (mm)
Machine weight: 180Kg
Iii. Performance and Characteristics
1. The instrument adopts explosion-proof motor and is equipped with overtemperature protection. Safety valve is installed on the cover of the container to ensure the safety of the instrument.
2. The instrument adopts the auto water pump and cooling water tank with piston displacement of 1.6 ~ 5.0L, the table is made of stainless steel, and the fastener is made of stainless steel screws, which are easy to be removed and not easy to rust.
3, the instrument adopts imported digital display temperature controller, PID tracking temperature control precision is high.
4. The instrument adopts turbine flowmeter sensor (this product is based on GB/T9246-1999 mechanical industry standard), and the measurement is accurate and intuitive.
5. The instrument adopts intelligent digital display timer, which is accurate and can display the actual running time after stopping midway.