QXS系列后稀释装置
产品简介
详细信息
QXS系列后稀释装置
QXS Series Dilution Device
The principle:
QXS药液稀释装置原理：
According to the test, high polymer flocculant solution of 5 ‰, if dissolved into 1 ‰, time is 2 minutes, and 2 ‰ polymer flocculant solution, if the solution is 1 ‰, time is 2 seconds (theory of data, the actual situation will be affected by drugs, temperature and other factors is different).
Therefore, 2 ‰ liquid after dosing pump, and join the flow of water, the pipeline mixer, liquid concentration is 1 ‰, achieve the required concentration and adding. From an economic point of view, the polymer can be dissolved automatically drug steeping machine is higher than that of the normal dosage ratio, after dilution device and then diluted dosing, good effect, and reduce the cost of investment.
根据测试，5‰的高分子絮凝剂溶液，如果溶解成1‰，时间为2分钟，而2‰的高分子絮凝剂溶液，如果溶解为1‰，时间为2秒钟（理论数据，实际情况会受药品种，气温等因素存在差异）。
因此，2‰浓度药液经加药泵泵出之后，又加入同流量的水，经管道混合器充分混合后，药液浓度变为1‰，达到所需投加的浓度。从经济角度考虑，采用高分子自动泡药机可适当溶解高于正常投加的比例，经后稀释装置稀释后再投加，效果良好，并减少了投资成本。
Specifications: 4
规格型号：4 种
The outlet flow: 2000～10000 L/h
出口流量：2000～10000 L/h
Product features:
产品特点：
A、 the system including the cut-off valve, filter, relief pressure valve, solenoid valve, flow meter and a special mixer etc.
本系统包括截止阀、过滤器、减压阀、电磁阀、流量计和专用混合器等；
B、control valve and automatic dosing control system to achieve automatic control, on-line dilution;
控制阀与加药自控系统联动，实现在线稀释自动控制；
C、 the special mixer for stainless steel (SUS304) material, durable;
专用混合器为全不锈钢（SUS304）材质，持久耐用；
D、the polymer automatic steeps drug system with the use, to increase economic dosing system;
与高分子自动泡药系统配合使用，增加加药系统经济性；
E、the flange connection are bigger than DN50, the rest are connected by screw threads;
大于DN50采用法兰连接，其余采用螺纹连接；
F、all components installed on the floor
所有部件统一安装于底板上。
The company reserves the right to change the design, configuration and product performance please consult our company personnel.
本公司保留设计变更之权利，具体配置和产品性能请向我公司人员进行咨询。