工作方式

管程物料通过电抛光处理的无缝钢管束内进行流动，壳程介质在相反的方向通过 管外流动，换热管束的末端采用双管板连接，并且作为渗漏检测点，避免管程物 料和壳程介质双向交叉污染，确保了药液的洁净。

Working principle

Tube material flow through the seamless steel tube electric polishing processing within the beam.Shell cheng medium flow in the opposite direction through the outer pipe,heat exchange tube bundle bottom USES tube plate tighten,some as a leakagemonitoring stations,prevent Two- way cross contamination bettwen the tube mate rial and Shell cheng medium.To insure the cleaning of the solution.

双管板换热器型式

ZZ系列双管板换热器有两种，直管式双管板换热器(ZZA型)和U型双管板换热器 (ZZB型)，管束端口采用全自动焊接，外壳体可根据客户的要求带保温或不带保 温。直管式双管板换热器采用异径快装接口，有效避免了换热器与管道连接处的 药液滞留，实现了真正的全排空设计。U型双管板换热器采用U型换热器，物料从 底壳点出液，避免液体滞留。

The type of double tube heat exchanger

In generally have two Types.Fixed tube heat exchanger and "U" Pipe heat exchanger.Fixed tueb heat exchanger adopt the different diameter fast loading interface.Effectively avoid Liquid stop at the cinnecting of heat exchange and pipeline,it can achieve the Whole emptying preset.And the "U" Pipe heat exchanger use the U type heat exchanger tube.produce the liquid from the rock bottom of the bottom box.Avoid

技术参数

换热面积：0.45-20m²

设计温度：≤165℃

设计压力：≤1.6MPa

表面处理：与产品接触部分的管道内表面光洁度8级以上，Ra=0.25-0.45μm

连接方式：管道物料快装连接壳程介质采用法兰或螺纹接口

安装方式：根据客户的实际需要，可水平或竖直安装。

Qualification

Heat Exchange Area:0.45-20m²

Designing Temerature:≤165℃

Design Pressure:≤1.6MPa

Surface Treatment:The part pipe inner surface which touch with the products smooth finish most over the mix mum 8 level.Ra=0.25-0.45μm

Connecting Method:Tube masterial fast loading connection shell side using flange process medium or interface

Install Method:Horizontal installaion or vertical installation acc or ding to customer.

设备应用

洁净蒸汽冷凝及冷却、高洁净液体的温度控制药液的冷却/加热注射取水点冷却 注射用水的冷去/加热

Application

Vapor condensation cooling,tempera-ture controlin hign clean liquid.Cooling/heating of liquid medicine.Cooling of injection water points.Liquid water cooling/heating.