WSJ超微粉碎机
产品简介
详细信息
超微粉碎机
-----------------------------------------------------------------------------------------------------------------
超微粉碎机概述 Description
该系列微粉碎机由主机、辅机、电控三个部分组成，设计紧凑，结构合理，具有风选式，无筛无网。机内装有分级机构，能使粉碎，分级一次完成。负压输送使粉碎作业时机腔内产生的热量源源不断地排出，故也适应于热敏性物料的粉碎。本机适应范围广，生产过程连续进行，出料粒度可调；能处理如：化学制品、食品、药品、化妆品、染料、树脂、壳物等多种物料的粉碎及分级。
Model WFJ series fine grinder consists of three parts i.e. main machine, auxiliary machine and electric control. Its features are compact in design, reasonable in structure. Its principle is using air to chose and no sieve or screen . Being installed grading mechanism inside the machine, the crushing and grading can be finished at the same time. When use negative pressure to transport in the operation of crushing, the heat produced from the chamber will be remo-ved continuously. Therefore it can also be suitable for crushing thermal sensitive raw materials. The scope of application of machine is wide. Its productive process is continuous and its size of granule can be adjusted. It can crush and grade many raw materials such as chemicals, foodstuff, medicines, cosmetic, dyestuff, resin, shell materials and so on.
-----------------------------------------------------------------------------------------------------------------
超微粉碎机技术参数 Technical parameters
| 规格型号 Specification and model | WFJ-15 | WFJ-18 | WFJ-36 |
| 生产能力 Productive capacity(kg/h) | 10～200 | 20～450 | 60～1000 |
| 进料粒径 Size of raw material to be fed(mm) | ＜10 | ＜12 | ＜15 |
| 出料粒度(目) Size of raw material to be discharged (mesh) | 80～320 | 80～450 | 80～450 |
| 总功率 Total power (kw) | 13.5 | 17.5 | 38 |
| 主转速 Main revolution(r/min) | 4500 | 4480 | 4000 |
| 外型尺寸Overall dimensions (L×W×H)(mm) | 4200×1200×2800 | 4700×1250×2900 | 9000×1500×3800 |
注：1.以上表中参数因物料差异较大，故产量和出料细度差异亦较大。
2.脉冲除尘器用空压机由用户自备。
Notes: 1.The parameters listed in above table have more difference with difference with different raw materials, therefore the output and size of raw material to be discharged have difference too.
2. The air compressor used for pulse bag duster should be prepared by customer.
