化工机械设备网

机型适用 Application

本机适用于产品在实施滚涂、喷涂、淋涂后表面涂料中稀释剂、气泡的挥发流平，然后干燥。

This machine is suitable for volatilizing and leveling of diluents and bubbles in the surface coating after roll coating, spray coating and shower coating, and then drying.

工作原理 Working principle

产品在实施滚涂、喷涂、淋涂后，流经可调节温度的恒温隧道，产品进入前段时表面涂料中稀释剂、气泡就会挥发流平，进入后端在较高温度下（或UV固化机），产品就进行了干燥。

After the product is applied by roller coating, spray coating and shower coating, it flows through a constant temperature tunnel with adjustable temperature. When the product enters the front stage, the diluent and bubbles in the surface coating will volatilize and level, and enter the rear end at a higher temperature (or UV curing). Machine), the product is dried.

机型特性 Characteristics

隧道温度可根据产品需要设定、调节，适应各种涂料的温度工艺条件。

输送速度可变频调节，适应各种涂料的流平时间工艺条件。

The temperature of the tunnel can be set and adjusted according to the product requirements to adapt to the temperature conditions of various coatings.

The conveying speed can be adjusted by frequency to adapt to the leveling time process conditions of various coatings.