features and usage

1. the pulse signal generator - maximum pulse output voltage can reach +5v(50ω load). its repeated frequency range is se-lected by the internal oscillator frequency (1mhz-10mhz) and crystal oscillator frequency (10mhz). (1hz-10mhz to choose int mode, 10hz-10mhz to choose x-tal mode)

2. at x-tal mode, using the knob, by the 7 pre-set frequency range, you can set a frequency accuray. at the int mode, you can set a stochastic repeated frequency.

3. it can generate a pulse wave of high quality (1hz-10mhz),thus it has a very wide application in all kinds of circuit test. in the analyzing and design of a digital circuit, it can be used as a clock pulse source.

4.single oscillator mode input
       method: press the switch
 
5.pulse output
       output voltage: 0 ~ +5v adjustable (50ω load)
                             0 ~ +10v adjustable (open status)
       rising time     : <10ns (50ω load，+2.5v -- +5v)
       falling time    : <10ns (50ω load，+2.5v -- +5v)
       period int      : 100ns-1000ms/ 1-7 ranges (freq. changes at each range)
       x-tal           : 100ns-100ms /1-7 ranges   (freq. fixed)
       delay time      : 0-50ms/1-7 ranges               (freq. changes at each range)
       pulse width    : 50ns-50ms /1-7ranges         ( freq.changes at each range)
 
6.trigger output
       output method: c-mos (74hco2)(50ω load, ≥1v)