QY100-1干式恒温器  产品报价：

Dry QY100-1 thermostat products quotation:

QY100-1干式恒温器产品介绍：
QY100-1干式恒温器是采用微电脑控制的恒温金属浴装置,利于高纯铝材料做为导热介质，以替代传统的水浴装置，具有控温精度高，制样平行性好等优点，可广泛应用于样品的保存和反应、DNA扩增和电泳的预变性、血清凝固等。

Dry QY100-1 thermostat product introduction:
Dry QY100-1 thermostat thermostat metal bath device is controlled by microcomputer, as a heat conduction medium for high purity aluminium material, to replace the traditional water bath device, with high precision temperature control, sample preparation as well as good parallelism, can be widely used in the sample preservation and reaction of DNA amplification and electrophoresis, and degeneration, serum solidification, etc.

QY100-1干式恒温器主要特点：
1、便捷的模块更换，便于清洁与消毒
2、干式恒温器的内置超温保护装置
3、温度偏差校准功能
4、自动故障检测及蜂鸣器报警功能
5、LED显示屏，即时温度现实、时间递减显示。
6、多种模块选择，更换，便于清洁与消毒食用各种试管

Dry type thermostat QY100-1 key features:
1, convenient module replacement, to facilitate cleaning and sanitation
2, dry thermostat's built-in overtemperature protection device
3, temperature deviation calibration function
4, automatic fault detection and buzzer alarm function
5, LED display, real-time temperature diminishing reality, time display.
6, a variety of module selection, replacement, to facilitate cleaning and disinfection of consumption of all kinds of test tubes

QY100-1干式恒温器技术参数：
1.控温范围：室温+5℃~150℃
2.升温时间：≤30分钟（从20℃升至150℃）
3.温度稳定性@100~150℃：≤±1℃
4.温度稳定性@40~100℃：≤±0.5℃
5.模块zui大温差@40℃：0.3℃
6.模块温度均匀性：≤±0.5℃
7.显示精度:0.1℃
8.时间设置zui长:99h59min

Dry type thermostat QY100-1 technical parameters:
1. The range of temperature control: room temperature + 5 ℃ ~ 150 ℃
2. The heating time: 30 minutes or less （from 20 ℃ to 150 ℃）
3. The temperature stability @ 100 ~ 150 ℃, + / - 1 ℃ or less
4. The temperature stability @ 40 ~ 100 ℃, plus or minus 0.5 ℃ or less
5. @ module maximum temperature difference of 40 ℃, 0.3 ℃
6. The module temperature uniformity: plus or minus 0.5 ℃ or less
7. Display precision: 0.1 ℃
8. Set the longest time: 99 h59min

可选模块  Optional modules