LANKO卫生泵,糖化泵

LECPLANKO卫生泵,糖化泵

参考价: 面议

具体成交价以合同协议为准
2022-06-30 11:45:06
195
产品属性
关闭
南京菲朗流体设备有限公司

南京菲朗流体设备有限公司

免费会员
收藏

组合推荐相似产品

产品简介

朗戈糖化泵主要用于输送啤酒醪、 麦汁、糖浆及其他类似的液体。此类泵可广泛应用于食品、啤酒酿造、生物工程、精细化工等行业中流量要求较大的场合。

详细介绍


LANKO卫生泵,糖化泵商品详细介绍
应用:
朗戈糖化泵主要用于输送啤酒醪、麦汁、糖浆及其他类似的液体。此类泵可广泛应用于食品、啤酒酿造、生物工程、精细化工等行业中流量要求较大的场合。
标准设计:
糖化泵由以下部分组成:泵体、叶轮、泵盖、泵轴、机械密封、标准电机。泵轴与电机轴采用梅花形弹性联轴器连接。
轴封:
糖化泵的轴封为单端面机械密封,可配置带水冲洗(冷却)装置。机械密封*高工作压力为0.8MPa,冷却水*高压力为0.1 MPa;并可根据用户要求配置双端面带水冲洗(冷却)机械密封,冷却水*高压力为0.1 MPa
Application
The LCP pump is designed for pumping beer mash, wort and sirup etc. It is widely used in the industries of food, beer brewing, bio-engineering and fine chemicals which required large flow.
Standard Design
The LCP pump consists of a pump body, impeller, pump cover, shaft, mechanical seal and standard motor. The shaft of pump and motor are connected with plum-shaped flexible coupling.
Shaft Seal
The LCP pump is equipped with either a single or a flushed mechanical shaft seal which used a single spring. The maximum working pressure of shaft seal is 0.8MPa. The flushed double mechanical shaft seal is available on request, the maximum pressure of cooling water is 0.1MPa.
朗戈卫生泵,糖化泵材质:
过流部件、轴承座、联轴器护罩: AISI 304不锈钢
泵轴: 0Cr17Ni4Cu4Ni (AISI 630不锈钢)
底座: Q235A
外表面: 喷砂
内表面: 喷砂
过液密封材料: EPDM乙丙橡胶
技术参数:
*大入口压力: 0.5MPa
温度范围: -10oC+140oC EPDM
噪声水平(1m处):小于85dB(A)
可冲洗密封:
水压: *高0.1MPa
电压和频率: 3 ~ , 50HZ380-420/660-690V/Y
电机功率: 7.5~45kW
Materials:
Product wetted steel parts, bearing support, coupling shroud: stainless steel AISI 304
Pump shaft 0Cr17Ni4Cu4Ni (Stainless steel AISI 630)
Pump base Q235A
Outside face Sandblasting
Inside face Sandblasting
Product wetted seals EPDM rubber
Technical data:
Max. Inlet pressure: 0.5MPa
Temperature range: -10oC to +140oC EPDM
Noise level (at 1m) : < 85dB (A)
Flushed seal
Water Pressure: Max. 0.1Mpa
Voltage and Frequency: 3~ , 50HZ380-420/660-690V/Y
Motor power: 7.5~45 kW
●朗戈卫生泵,糖化泵配用电机:
1 电机按照国际标准设计制造
l 国际电工委员会IEC34IEC72
l 英国标准BS4999-5000
l 澳大利亚标准AS1359-2
l 德国标准DIN42673
l 符合欧共体“CE”标记要求
2 电机符合下列标准
l GB755-87 *GB10069-88 *Q/JBQS28-2000
3 合理的结构设计
l 灵活的引出线方向
4 *的电气性能
l 低噪音、低振动
l 高性能的防护等级
l 电机的标准设计防护等级为IP55,可按用户要求提供更高要求的防护等级
l 适用双频率、宽电压使用
l 电机设计考虑了不同地区的电压变化,使电机适应多个地区电压使用,并
保证用户使用性能
l 提高绝缘等级、增加电机使用寿命
NISSIN
日新卫生泵,糖化泵
● Motor
1 These motors are built to comply with current International Standards
l International Electro Technical Commission IEC34IEC72
l British Standard BS4999-5000
l Australian Standard AS1359-2
l German Standard DIN42673
l EU directives to fulfill European “CE” marking
2 These motors are built to comply with current National Standards
l GB755-87 *GB10069-88 *Q/JBQS28-2000
3 Mechanical Design
l Terminal boxes
4 Electrical Design
l Minimum noise and vibration levels
l Maximum degrees of protection
l All motors are protected to IP55 as a minimum. Higher levels of protection are available on request.
l Service and operation conditions
l Motors are designed to be insensitive to wide supply voltage fluctuations
l Class F insulation offers greater reliability and security

● NISSIN日新卫生泵,糖化泵, 糖化泵型号说明
Sanitary Centrifugal Pump Size Explanation
示例:(Example
NISSIN
日新卫生泵自吸泵转子泵。NISSIN日新卫生泵,糖化泵。
更多相关系列敬请咨询菲朗公司。
上一篇:上海理涛防火门防烟性能试验装置:操作简便 下一篇:肉牛背膘眼肌测定仪测背膘厚度眼肌面积图像分析
热线电话 在线询价
提示

请选择您要拨打的电话:

温馨提示

该企业已关闭在线交流功能