箱体式干燥机（干燥柜/烤箱）

箱体式干燥机适用于所有种类的聚合物材料烘干，并能同时烘干不同的材料，非常适合用于少量，多样性的原料或试模时使用，也可用于电子、电镀、烤漆、印刷等多行业相关产品之预热或干燥处理。

1、 采用精密P.I.D电子温度控制，达到均匀的烘干效果；

2、 高温密封门可保持一致的温度并降低热量损耗；

3、 不锈钢材质的烤盘，可防止在烘干过程中污染原料;

4、 优化设计，方便维修保养;

5、 入风口、排风口均可调试设计，可方便调节风量;

6、 24小时定时装置，操作方便;

7、 配备超温保护器，可避免超温干燥;

8、 配备马达保护器;

9、 配备警示灯，可立即反应故障.

箱型干燥机中有可动的盘子，可将烘干的原料放在盘子内，运行时风车迫使空气通过电热管、板均匀吹进原料，当原料均匀烘干后，潮湿的空气从另一面排风口排出。

Box Type Drying Machine(Drying Cupboard/Oven)

Box type dryer is suitable for all kinds of polymer materials drying, and can dry different materials at the same time, very suitable for use in a small amount and variety of raw materials when the mold is used, can also be used for pre heating or drying of electronics、electroplate、painting、printing and other related products.

1、 Precise electronic temperature control using P.I.D, achieve even drying effect;

2、 The high temperature sealing door can keep the same temperature and reduce the heat loss;

3、 Stainless steel tray can prevent contamination of raw materials in the drying process;

4、 Optimum design, convenient maintenance;

5、  The design of the air inlet and outlet can be debugged, air volume can be easily adjusted;

6、 24 hour timing device, easy operation;

7、 Equipped with over temperature protector, avoid over temperature drying;

8、 Equipped with motor protector;

9、 Equipped with warning lights, immediate response failure.