品牌
生产厂家厂商性质
北京市所在地
北京北广精仪主营产品:*材料试验机(拉力机)、电压击穿试验仪、体积表面积电阻率测试仪、介电常数与介质损耗测试仪、低温脆性冲击试验仪、耐电弧性能试验仪、高压漏电起痕试验仪、环境试验箱、维卡热变形试验仪、转子硫化仪、熔体流动速率仪、水平垂直燃烧试验仪、门尼粘度试验仪、阿克隆磨耗试验机、气动冲片机、手动冲片机、滑动摩擦磨损试验机、哑铃制样机、简支梁冲击试验机、悬臂梁冲击试验机、氧指数测定仪、水分测定仪、海绵密度测定仪、橡胶回弹仪等。
一、臭氧老化试验箱产品型号及规格
1、产品型号:YF-150
2、工作室尺寸(mm):D500×W500×H500
二、臭氧老化试验箱技术参数
1、温度范围:RT+10℃~60℃
2、臭氧浓度:25~1000pphm直读可调
3、温度均匀度 :≤±2℃
4、温度波动度 :≤ ±0.5℃
5、温度偏差:≤±2℃
6、臭氧浓度偏差:±10% pphm
7、臭氧样架:带静态拉伸试验样架 (产品伸长率0~100%)
8、韩国*“三元”ST190仪表,PID智能控制,控温精确,有较强的抑制温度过冲能力。
三、箱体材质
外箱材质:采用冷轧板静电喷塑,色调均匀美观大方,增加了外观质感和洁净度
内箱材质:采用SUS304进口高级不锈钢板
四、臭氧系统
1、臭氧浓度控制器:LED显示控制器
2、测量范围:25-1000pphm
3、分 辨 力:0.02ppm
4、大允许误差:≤±1%FS
重复性:不大于示值误差值的1/2
5、稳定性:零点漂移≤±1%FS/7d
量程漂移≤±1%FS/7d
绝缘强度:仪器电源线对对仪器外壳间,在1500V交流电压下历时1min无击穿和飞弧
6、电压变化:电压变化1%,误差不大于示值误差值的1/2
7、压力范围:大气压±10%
8、臭氧发生器:采用北京“天华”电压无声放电管
9、电极冷却方式:风冷
10、臭氧产生供气源:空气
11、臭氧浓度检测传感器:英国进口“天朗”
12、臭氧检测探头采集精度为≤±5%F.S
五、附件
1、配有四只万向转轮便于箱体运动(选配)
2、视窗为中空特制耐高钢化玻璃(带照明)
符合标准:
GB/T7762-2003 硫化橡胶或热塑性橡胶 耐臭氧龟裂 静态拉伸试验方法;
GB/T2951.21-2008电缆绝缘和护套材料通用试验方法,
GB/T 11206-2009橡胶老化试验 表面龟裂法;
以及其它相关标准规定的试验方法。
国标简介: 硫化橡胶或热塑性橡胶 耐臭氧龟裂 静态拉伸试验 GB/T 7762-2003 After-sale service
售后内容: After sales content: 我公司派工程师负责安装调试及培训。 Our company sends engineers to be responsible for installation, debugging and training.
产品自客户验收之日起,免费保修2年,终身维修。 Products from the date of customer acceptance, free warranty for 2 years, life-long maintenance.
1、设备安装调试: 1. Equipment installation and commissioning: 免费为用户提供所购仪器的安装调试服务。在进行安装调试前用户方应提供相应的准备工作,并予以提前通知,具体安装调试日期双方可以协商而定。设备安装调试由多年行业*工程师免费进行。保证用户可以正确使用、软件操作和一般维护以及应及故障的处理。 Provide free installation and debugging services for users. Before installation and commissioning, the user shall provide corresponding preparations and give advance notice. The specific installation and commissioning date can be determined by both parties through consultation. The equipment installation and debugging are carried out by senior engineers for many years free of charge. Ensure that the user can use the software correctly, operate and maintain the software, and deal with the faults.
2、培 训: 2. Training: 我公司工程师免费为用户提供操作人员培训,直到操作人员能独立操作为止。 Our company's engineers provide free operator training for users until the operators can operate independently.
3、设备验收标准: 3. Equipment acceptance standard: 用户方按订货技术要求进行验收。并符合国家标准要求。设备验收在用户方进行并由我公司安装调试技术人员和用户共同在维修报告上签字以确认仪器的调试工作完成。 The user shall conduct acceptance according to the order technical requirements. And meet the requirements of national standards. The equipment acceptance shall be conducted by the user side, and the installation and commissioning technicians of our company and the user shall jointly sign the maintenance report to confirm the completion of the instrument commissioning.
4、设备维修服务: 4. Equipment maintenance service: 我公司产品自用户现场调试验收合格后2年内免费保修,终身维护。在2年免费保修期内产品发生非人为质量问题,我公司为客户提供免费维修。如产品在免费保修期外出现故障,维修服务只适当收取材料成本费。 Our company's products are free of charge for warranty and lifetime maintenance within 2 years after the user's on-site commissioning and acceptance. During the 2-year free warranty period, our company provides free maintenance for customers in case of non-human quality problems. If the product breaks down outside the free warranty period, the maintenance service will only charge the material cost properly.
5、技术zhi持: 5. Technical support: 对于所需仪器的用户,根据用户的要求提供专业的技术方案。除了常规的仪器服务外,我公司技术部还可为用户提供各种非常规设备的技术zhi持。 For the users of required instruments, professional technical solutions shall be provided according to the requirements of users. In addition to conventional instrument services, our company's technical department can also provide users with technical support for various unconventional equipment.
6、售后响应: 6. After sales response: 在接到用户维修邀请后,2小时内做出反应,并给予解决。如未解决,我公司指派工程师及时到达用户现场,解决问题至设备正常使用为止。 After receiving the user's maintenance invitation, respond within 2 hours and solve it. If it is not solved, our company will assign engineers to arrive at the user's site in time to solve the problem until the equipment is in normal use. |