品牌
其他厂商性质
所在地
卧式活塞卸料离心机主要技术参数 : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
产品结构原理Structures and Principles The main motor drives the basket to rotate at a full speed, material being fed into through a feed pipe and distributed evenly on filter screen walls of the basket inner sect. Under the centrifugal force, the liquid is discharged out of the basket through filter screen and the holes of the basket, and then out of the machine through the tube for discharging liquid, while the solid deposits in the basket as a ring layer of cake. As the pusher plate is rotating at the same speed as the basket, it is pushed by the piston to reciprocate continuously and axially, thus pushing the cake layer to move out of the basket and then out of the machine from its front shell base. HY Series are a kind of pusher filtering centrifuge with continuous operation. They can perform feeding, separating washing and discharging in sequence at their full-speed running. This machine has the advantages of continuous operation, stable performance, easy operation, large capacity, ideal washing effect and low moisture content of cake. They can be used for separating the suspension with solid phase particle size of more than 0.1mm and with the concentration of over 40%. They are suitable for chemical industry industry, fertilizer, manufacturing salt and alkali, especially suitable for the solid-liquid separation of ammonium bicarbonate, ammonium chloride, mirabilite, etc. 产品设计、制造标准 : 1 、 根据 JB/T447-1992 《卧式活塞推料离心机技术条件》 、 JB/T4063-1991 《卧 式活塞推料离心机型式与基本参数》等标准设计和制造,按 GB/T19001-2000idt ISO9001-2000 标准质量体系进行。 2 、 产品检测技术及手段: 根据湖南省湘潭离心机有限公司 《质量保证手册》 第 4.11 检测、测量和试验设备的控制对产品进行检测。 产品设计、制造标准 : 1 、 根据 JB/T447-1992 《卧式活塞推料离心机技术条件》 、 JB/T4063-1991 《卧 式活塞推料离心机型式与基本参数》等标准设计和制造,按 GB/T19001-2000idt ISO9001-2000 标准质量体系进行。 2 、 产品检测技术及手段: 根据湖南省湘潭离心机有限公司 《质量保证手册》 第 4.11 检测、测量和试验设备的控制对产品进行检测。 产品设计、制造标准: 1、根据JB/T447-1992《卧式活塞推料离心机技术条件》、JB/T4063-1991《卧式活塞推料离心机型式与基本参数》等标准设计和制造,按GB/T19001-2000idt ISO9001-2000标准质量体系进行。 2、产品检测技术及手段:根据湖南省湘潭辉煌离心机机械制造有限公司《质量保证手册》第3.9检测、测量和试验设备的控制对产品进行检测。
特别提示: 1、技术参数以生产厂家说明书为准。 2、洽询时,请顾客详细赐告物料特性参数及工况条件要求。 l 滤网间隙宽度选择范围:0.1-0.4mm。 l 可按GMP规范设计、制造。 |