ABB DSQC355A 3HNE00554-1机器人配件
1.产 品 介 绍
品牌：ABB
型号：ABB DSQC355A 3HNE00554-1
产品说明：机器人配件
特点：模块/卡件，控制器，触摸屏，伺服驱动器
优势：供应进口原装，专业停产配件。
快递方式：国内顺丰、德邦、京东快递包邮，按照实际报价货期发货
2.产 品 详 情 资 料：
ABB DSQC355A 3HNE00554-1机器人配件说明这些电缆的一端有一个直角24针连接器，另一端有一组剥线端。这两条电缆相同，只是连接器方向相反。电缆连接器方向的这种差异是为了匹配32点I/O模块的双连接器类型上的相反连接器方向。这24芯电缆中的每个导体的额定电流为1.2安培。如果将这些电缆与具有较高输出电流额定值的16点输出模块一起使用，则负载电流额定值必须使用较低的值1.2。如果现场设备需要1.2安培以上的电流，请勿使用TBQC组件。使用标准接线板。应用这些电缆用于带有富士通24针用户I/O连接器的90-30系列I/O模块。这些模块有两类：ABB DSQC355A 3HNE00554-1电缆用于模块左侧连接器（前视图），ABB DSQC355A 3HNE00554-1电缆用于模块右侧连接器。模块的右侧连接器与I/O电路组A和B连接；模块的左侧连接器与C组和D组连接。参见第7章“输入和输出模块ABB DSQC355A 3HNE00554-1
Description These cables each have a right-angle 24-pin connector on one end and a set of stripped wire ends on the other. These two cables are identical except for their opposite connector orientations. This difference in the cables’ connector orientations is for the purpose of matching the opposing connector orientations on the dual-connector type of 32-point I/O modules Each conductor in these 24-conductor cables has a current rating of 1.2 Amps. If using these cables with a 16-point Output module with a higher output current rating, you must use the lower value of 1.2 for the maximum load current rating . If you have field devices that require more than 1.2 Amps, do not use a TBQC assembly. Use the standard Terminal Board instead.Applications These cables are for use with Series 90-30 I/O modules that have the Fujitsu 24-pin user I/O connector. There are two categories of these modules:TheABB DSQC355A 3HNE00554-1 cable is for the modules’ left side connector (front view), and the ABB DSQC355A 3HNE00554-1 cable is for the modules’ right side connector. The modules’ right side connector interfaces with I/O circuit groups A and B; the modules’ left side connector interfaces with groups C and D. See Chapter 7, “Input and Output Modules
3.产 品 展 示
4.关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司，转载请附上此链接: