品牌
其他厂商性质
苏州市所在地
Microfluidic Emulsification System: MES-Lab
主要应用
The main application
◆食品乳化 Food emulsification
◆制剂乳化 Preparation emulsification
◆化妆品乳化 Cosmetic emulsification
◆生物制剂 Biological preparations
原理介绍
Principle Introduction
可实现样品的初乳化、复乳化、粒径控制功能。
Can realize the functions of initial emulsification, re-emulsification and particle size control.
微流控乳化系统通过制备泵和高压输送泵与微流控芯片相连接，A相和B相可按照一定的比例恒速的输送至芯片中进行混合，乳化。在微流控芯片中通过设计不同的流道结构，控制不同的速度，使得样品在微流控芯片中达到湍流、层流或雾化状态，可以实现样品的初乳化或复乳化的要求。
Microfluidic emulsification system is connected with microfluidic chip by fabricating pump and high-pressure conveying pump. Phase A and phase B can be mixed and emulsified at constant speed in a certain proportion. In microfluidic chips, different runner structures are designed and different velocities are controlled to make the samples turbulent, laminar or atomized in the microfluidic chips, which can meet the requirements of pre-emulsification or re-emulsification.
制备好的样品通过高压泵输送至高压微流控芯片中，通过撞击力和剪切力来控制粒径，使其达到所需范围内。粒径最小可达到100nm以内，PDI至0.1以下。
The prepared samples were transported to the high pressure microfluidic chip by high-pressure pump, and the particle size was controlled by impact force and shear force to reach the required range. The smallest particle size can be less than 100nm, and PDI can be less than 0.1.
技术参数
Technical Parameter
流量范围（ml/min） Flow range | 0.1～200 | 流量连续可调 Continuously adjustable flow rate |
压力范围（MPa） Pressure | 0-25 | 具有高低压保护功能 High and low voltage protection function |
温度控制（℃） Temperature | ～100℃ | / |
流量设定误差%（ml/min） Flow rate error | ≤±1% | / |
流量重复性误差%（ml/min） Flow repeatability error | ≤1% | / |
压力脉动（MPa） Pressure fluctuation | ≤0.1 | / |
压力准确度（MPa） Pressure accuracy | ≤0.1 | / |
芯片通道尺寸 Chip channel size | 20um~1mm | 二通道，三通道，四通多或其他 Two-way, three-way, four-way or more |
结构示意
Structural Diagram
———— / END / ————
转载声明：为更广泛的传递行业信息，欢迎转载本文，转载时请注明出处和来源，违者必究。
本篇文章原创版权归属：苏州艾特森制药设备有限公司
