1. 离心机均为上部卸料密闭型、间歇操作的过滤设备。物料由密闭机壳上的进料管加人转鼓，在离心力场作用下，液相穿过过滤介质排出机外，固相物截留在转鼓内，停机后打开机盖从上部卸料。具有运转平稳、操作简便和进料、洗涤、脱水在密闭状态下进行等特点。

2. 无基础安装，取消了传统三足式悬挂结构，简化安装过程，设计合理，结构新颖简洁，外观美观，清洗方便，基础平板即为工作操作平台，操作维护方便。

3. 转鼓、机壳、基础平板均抛光处理；所有紧固件军为不锈钢；传动部件均为不锈钢封闭；密封件均为硅橡胶，配清洗喷淋系统，整机符合GMP卫生要求。

4. 与平板连接的进口高粘度液态阻尼剂式隔振器使离心机因振动产生的能量全部被隔振器吸收，对基础地面及周边设备无振动干扰。

5. 机壳配置全开大翻盖，卸料方便，密闭性好，特别适用于有毒、有害介质的固液分离，采用防爆电机变频驱动、防静电三角带、充氮保护可适用于易燃易爆物料的固液分离。

6. 整机密闭性、防爆性、洁净度好。

1. Centrifuges are closed upper discharge type, intermittent operation of filtration equipment.The material is added into the rotary drum by the feeding tube on the airtight housing. Under the action of centrifugal force field, the liquid phase passes through the filtration medium and is discharged from the machine. The solid phase material is retained in the rotary drum.It has the characteristics of smooth operation, simple operation, feeding, washing and dehydration in the closed state.

2. Without foundation installation, the traditional three-legged suspension structure is cancelled, the installation process is simplified, the design is reasonable, the structure is novel and simple, the appearance is beautiful, and the cleaning is convenient.

3. Drum, housing, foundation plate are polished;All fasteners are stainless steel;The transmission parts are sealed with stainless steel;Seals are silicone rubber, with cleaning spray system, the whole machine in line with GMP health requirements.

4. The imported high viscosity liquid damping agent type vibration isolator connected with the plate makes all the energy generated by the vibration of the centrifuge be absorbed by the vibration isolator and has no vibration interference to the foundation ground and surrounding equipment.

5. The machine case is equipped with fully open big cover, convenient unloading, good tightness, especially suitable for solid and liquid separation of toxic and harmful media, the use of explosion-proof motor frequency conversion drive, anti-static triangle belt, nitrogen protection can be applied to the solid and liquid separation of inflammable and explosive materials.

6. The whole machine is airtight, explosion-proof and clean.
   

待分离的物料经进料管进入高速旋转的离心机转鼓内，在离心力场的作用下，物料通过滤布（滤网）过滤，液相经出液管排出，固相则截留在转鼓内。

待转鼓内滤饼达到机器规定的装料量时，停止进料，对滤饼进行洗涤，同时将洗涤液滤出。滤饼脱液达到要求后，停机。专用的吊具将滤袋连同滤饼一起吊出至卸料处，打开卸料口，将滤饼卸出，然后将滤袋复位，进入待机状态。

The material to be separated enters into the spinning drum of the centrifuge with high speed through the feeding tube. Under the action of centrifugal force field, the material is filtered through the filter cloth (screen), the liquid phase is discharged through the outlet tube, and the solid phase is retained in the spinning drum.

When the filter cake inside the drum reaches the loading quantity specified by the machine, stop feeding, wash the filter cake and filter out the washing liquid at the same time.When the filter cake dewatering meets the requirements, stop the machine.The special spreader lifts the filter bag together with the filter cake to the designated unloading place, opens the unloading port, discharges the filter cake, and then resets the filter bag and enters the standby state.

结构简单，性能可靠，设计合理，操作维修方便，过滤时间可随时掌握，滤渣能够充分洗涤，固体颗粒不被破坏。 

本产品广泛适用于：化学工业，食品工业，制药、矿冶、环保、纺织印染（纤维状物质及印染洗涤后的脱水）等行业。

Simple structure, reliable performance, reasonable design, easy operation and maintenance, filter time can be mastered at any time, filter residue can be fully washed, solid particles are not destroyed.

This product is widely used in: chemical industry, food industry, pharmacy, mining and metallurgy, environmental protection, textile printing and dyeing (fibrous substances and printing and dyeing after washing dehydration) and other industries.