3033B2 三轴加速度传感器-深圳市汉斯福特科技有限公司手机版

详细介绍

加速度传感器中有一种是三轴加速度传感器，同样的它是基于加速度的基本原理去实现工作的，加速度是个空间矢量，一方面，要准确了解物体的运动状态，必须测得其三个坐标轴上的分量；另一方面，在预先不知道物体运动方向的场合下，只有应用三轴加速度传感器来检测加速度信号。由于三轴加速度传感器也是基于重力原理的，因此用三轴加速度传感器可以实现双轴正负90度或双轴0-360度的倾角，通过校正后期精度要高于双轴加速度传感器大于测量角度为60度的情况。三轴加速度传感器的好处就是在预先不知道物体运动方向的场合下，只有应用三维加速度传感器来检测加速度信号。三维加速度传感器具有体积小和重量轻特点，可以测量空间加速度，能够全面准确反映物体的运动性质。

美国Dytran的3033B2是一款微型三轴加速度传感器/振动传感器，压电式工作原理，重量仅11g，集成石英剪切感应元件，不锈钢外壳材质，适应于小质量的振动监测。

The Dytran 3033B2 is a low profile triaxial IEPE accelerometer with a height of 0.31 inches (7.9 millimeters) and a total weight of 11 grams. Featuring quartz shear sensing elements packaged in a rugged stainless steel housing for improved frequency response, the model 3033B2 is ideal for low mass vibration monitoring.

The model 3033B2 utilizes a 3-foot integral cable and thru hole mounting capabilities. This centralized screw mounting configuration allows for the sensor to be turned 360° prior to securing for ease of sensor installation. If desired, the accelerometer may also be adhesively mounted to the test article.

特性

1. 10 mV/g sensitivity

2. 500g range

3. 1 to 8,000 Hz frequency range (±5%)

4. 3-foot integral cable

5. Thru hole mount

6. 11 grams

7. Stainless steel

8. 360° cable orientation

9. Triaxial

10. IEPE

应用

1. Environmental Stress Screening (ESS)

环境应力筛选

2. Product response testing

产品响应测试

3. General purpose triaxial vibration measurements

一般目的三轴振动测量

WEIGHT (NOT INCLUDING CABLE) 11 GRAMS

SIZE, HxWxD 0.60 x 0.60 x 0.310 IN.

MOUNTING PROVISION, (THRU HOLE IN HSN’G) 4-40 X .420 LONG CAP SCREW

ELECTRICAL CONNECTIONS (3 BNC PLUGS) 3 FT.-8 INCHES LONG CABLE

MATERIAL, HOUSING & CABLE ADAPTOR 300 SERIES STAINLESS STEEL

MATERIAL, CABLE JACKET POLYURETHANE

PERFORMANCE

SENSITIVITY, +/- 20% (Measured at 100 Hz, 1 G, RMS) 10 mV/G

RANGE, F.S. for +/- 5 VOLTS OUT ±500 G's

FREQUENCY RESPONSE, +/- 5% 1 to 8000 Hz

MOUNTED RESONANT FREQUENCY, NOM. 40 kHz

ELECTRICAL NOISE FLOOR, EQUIVALENT .007 G

LINEARITY ±2 % F.S.

TRANSVERSE SENSITIVITY, MAX 5 %

ENVIRONMENTAL

MAXIMUM VIBRATION ±750 G

MAXIMUM SHOCK 1000 G, PEAK

TEMPERATURE RANGE -60 to +250 oF

COEFFICIENT OF THERMAL SENSITIVITY .03 %/oF

ENVIRONMENTAL SEAL EPOXY

ELECTRICAL

COMPLIANCE (SUPPLY) VOLTAGE RANGE +18 to +30 VDC

SUPPLY CURRENT RANGE (From constant current type power unit only) 2 to 20 mA

OUTPUT IMPEDANCE 100 OHMS

OUTPUT VOLTAGE BIAS, NOM. +10 VDC

DISCHARGE TIME CONSTANT, NOM. 0.5 SEC

OUTPUT SIGNAL POLARITY FOR ACCELERATION TOWARD CONVENTIONAL AXES POS

ELECTRICAL ISOLATION, signal/power ground to case >10 MEGW

订货型号

3033B2

产品简介

详细介绍