品牌
经销商厂商性质
上海市所在地
SMC直动式3通电磁阀选用方法概述
能操作单作用气缸及气控阀。
＊ 体积小、流量大、耗电量低。
＊与新款5通电磁阀SY3000·SY5000系列的尺寸相同。
∗ Refer to Table (3) for available combinations between each electrical option
(S, L, Z) and rated voltage.
| 系列 | SY300 | SY500 |
| 使用流体 | 空气 | |
| 使用压力范围MPa | 单电控 0.15~0.7，双电控 0.1~0.7 | |
| 响应时间ms | 单电控10，双电控8 | 单电控14，双电12 |
| zui高动作频率Hz | 10 | 5 |
| 接管口径 | M5, ø4, ø6 | RC1/8, ø4, ø6, |
| 有效截面积mm2 | 3.6 | 9.8 |
| 环境及流体温度 | zui高50° | |
| ＊给油 | 不需要 | |
| 手动操作 | 螺丝刀压下锁定型 | |
| 抗冲击/振动能力 | 150/30 ms2(8.3~2000Hz) | |
| 密封 | 防灰尘 | |
SMC直动式3通电磁阀选用方法概述
∗∗ If using for other fluids, please consult with SMC.
Note 1) The leakage amount (10–6 Pa·m3/s) of “V”,
“M” options are values when differential pressure is 0.1 MPa.
Note 2) “V”, “M” and “K” options are for oil-free treatment.
Note 3) The dynamic viscosity of the fluid must not exceed 50 mm2/s.
Note 4) Coil insulation type Class H: AC spec. only,
Class B/AC spec.: built-in full-wave rectifier type only
Note 5) The nuts (non-welded parts) are nickel plated on the Brass (C37) material.
Note 6) There is no shading coil attached to DC spec. or Class B/AC spec.
