莱力斯克LK-308P工业吸尘器技术参数

Eli Lisk LK-308P technical parameters of industrial vacuum cleaner

 莱力斯克LK-308P工业吸尘器特点：

1.LK-308P此款机器采用真空吸尘电机，机器装置三颗电机，可以根据所吸物质开一颗电机或者二颗电机，三颗电机同时开启功率可以达到3600W，开关具有防水设计，操作简单。

2.此款机器可吸尘吸水，配有吸水浮球，当水吸到一定水位时，浮会测式到水位线，自动浮上去机器还是正常运转，但是没有吸力，不会造成水直接进到马达里，起到一个很好的保护电机作用。

3.LK-308P机器的后方有个脚踏板，可以控制吸耙的抬起和放下，工作的时候把脚踏板踩下去，不工作的时候把脚踏板踩上来，推吸扒的安装也比较简单，购机后按照说明书上的步骤操作即可，安装好以后，手推着机器走就可以吸尘了。
4.此款机器适用于:工厂除尘，车间吸尘，车床配套，机械厂吸油污。可吸物：粉尘，颗粒，砂石，纸屑，油漆，污垢，切削液，玻璃碎片，打磨除锈，设备配套使用等。 

Eli Lisk LK-308P industrial vacuum cleaner features:

1. LK-308P vacuum cleaner motor is used in this machine. The machine is equipped with three motors. One or two motors can be switched on according to the absorbed substance. The power of three motors can reach 3600W at the same time. The switch has waterproof design and simple operation.

2. This machine can absorb water and dust. It is equipped with a water-absorbing float ball. When the water reaches a certain level, the float will measure the water level. The machine will automatically float to the water level. However, without suction, it will not cause water to enter the motor directly, thus playing a very good role in protecting the motor.

3. There is a foot pedal behind the LK-308P machine, which can control the lifting and lowering of the suction rake. When working, the foot pedal is trampled down. When not working, the foot pedal is trampled up. The installation of the push-suction pickup is relatively simple. After purchasing the machine, follow the steps in the instructions. The vacuum rake is 50 cm wide. After installation, the hand-pushed machine will be pushed. The 1250px can be sucked up by the device.

4. this machine is suitable for plant dedusting, workshop vacuuming, lathe matching, and machinery plant for oil absorption. Absorbable: dust, granules, sand, paper scraps, paint, dirt, cutting fluid, glass fragments, grinding and rust removal, equipment supporting use, etc.