一、工作原理及应用范围介绍   Introduction of Working Principle and Scope of Application

本设备的目的是通过设置旋转离心盘、鼓风机、喷枪，将湿颗粒制成美丽的球丸。将前道工序做成的湿颗粒投入旋转离心盘内，启动鼓风机后再将旋转离心盘启动，使湿颗粒受到环隙空气浮力、旋转离心力、自身重力作用，呈环周绳股状运动，从而形成真球度*的球丸。主要用于制药、食品等行业进行湿粒、软粒的球形化处理。

The equipment is mainly used for manufacture the wet granule into beautiful pellets through centrifugal pan, air blower and spray gun. The wet granules produced in the former processes will be put in the centrifugal pan, which will be started after the air blower is started. The wet granules will be moved in the ring strａnd shape under the actions of annular air buoyancy, rotating centrifugal force and gravity, thus to form the pellets with extremely high true sphericity. It is mainly applicable to spheroidization treatment of wet and soft granules in the pharmacy and food industries.

二、特点Characteristics

1.本机采用立式圆筒结构，结构巧妙地满足抛丸工艺要求。

2.设备内表*，密闭状态下工作，符合GMP要求。

3.制丸时间短，高效节能。

4.丸剂、微丸等圆整度好，表面光滑，球粒内组分分布均匀。

5.较传统工艺时间缩短，成丸率高。

1. The vertical cylinder structure is adopted by the equipment to meet the requirements of shot blasting process.

2. The equipment is free of dead angle and operates in the closed state, complying with GMP requirements.

3. It is short in pelleting, efficient and energy-saving.

4. The pill and pellets have high rounding degree and smooth surface; and components in the particle are distributed uniformly.

5. Compared with the traditional process, it requires shorter time while has high yield rate.

三、技术参数（下表中数值仅供选型时参考）

Technical parameters (the values in the table below are for reference in type selection only)

四、结构简图Dimension sketch

湿颗粒抛丸机