三维混合机

一、工作原理及应用范围介绍 Introduction of Working Principle and Scope of Application

该机在运动中由于混合桶具有X、Y、Z空间多个方向运转动作，使各种物料在混合过程中加速了流动和扩散作用，同时还避免了一般混料机因离心力作用所产生的物料比重偏析与积聚现象。混合*，能有效确保混合物料的品质。

本机广泛运用于制药、化工、食品、冶金、轻工及科研单位等。

     The mixing drum operates on several directions in the X, Y and Z spaces to accelerate the flow and diffusion of various materials during the mixing and avoid specific gravity segregation and accumulation of material due to centrifugal force. The full mixing can ensure the best quality of mixed materials.

     This equipment is widely applied in the pharmacy, chemical, food, metallurgy, light industry and research institutions.

二、特点Characteristics

1. 由于系多向运动，混料桶内物料交叉混合点多，混合效率高，均匀度可达99.9％以上。

2.  比传统混料机生产效率高，装载系数可达0.9，而传统混料机为0.4-0.6。

3.  设备结构巧妙且紧凑，运行采用无极变速，以满足不同物料的工艺要求。

4.  出料干净，清洗方便。

1. As multi-direction movement, the materials in the mixing drum are crossed and mixed with high mixing efficiency and uniformity over 99.9%.

2. It has high production efficiency than traditional mixers; the load factor is up to 0.9, while that of the traditional mixer is 0.4-0.6.

3.The equipment is ingenious and compact in structure withcontinuously variable transmission adopted and meets the process requirements of various materials.

4. It is clean in discharge and convenient for clean.

三、外形简图Dimension sketch

四、技术参数（下表中数值仅供选型时参考）

Technical parameters (the values in the table below are for reference in type selection only)